Features
- 1 TriplePower LED, 2 SinglePower White LEDs and 2 SinglePower red LEDs emit 100 lumens (max power)
- Red night vision mode activates without cycling through white mode
- Sleek low-profile design uses 4 AAA batteries
- Settings include full strength in proximity and distance modes, dimming, strobe, red night vision and lock mode
- Three-level power meter shows remaining battery life for 3 seconds after switching on headlamp
- Protected against water immersion down to 1 metre for 30 minutes (IPX 7)
Specifications
| Light Source | 1 x TriplePower LED, 2 x SinglePower White LEDs, 2 x Single Power Red LEDs |
|---|---|
| Maximum Output | 100 lumens |
| Beam Range | 70m (TriplePower LED); 25m (2 SinglePower LEDs) |
| Burn Time | 200 hours (TriplePower LED); 125 hours (2 SinglePower LEDs) |
| Water Resistance (IPX Rating) | 7 (Protected against water immersion - Immersion for 30 minutes at a depth of 1m) |
| Weight without Batteries | 110g |
| Batteries | 4 AAA included |
Care
The Storm is waterproof rated to IPX7. This does not include salt spray or high-alkalinity fluids. It will continue to function when submerged one meter deep for 30 minutes.
- Do not use the Storm at, or expose it to, temperatures above 60 °C (140 °F).
- At very cold temperatures battery power and life will be diminished.
- To avoid scratching the lens, do not place the headlamp lens down on a surface.
Ensure that your headlamp is clean and dry before and after each use and before storage. DO NOT STORE A WET HEADLAMP. To dry it, turn your headlamp off and open the battery door. Remove the batteries and allow the housing to air dry thoroughly before closing it.
- Do not artificially heat your headlamp to dry it.
- If your headlamp has been exposed to salt water, it must be rinsed with fresh water then dried and assembled to prevent corrosion.
- Use a mild soap and freshwater rinse to clean the elastic strap.
- Do not clean in washing machine, dishwasher or with a high-pressure hose.
- Do not scrub with abrasive substances or surfaces.
- If the battery contacts are corroded, remove the corrosion by sanding lightly with a fine-grain emery cloth.
Video
Inside Black Diamond's lighting technology
Questions on Black Diamond Storm Headlamp
No questions asked yet


