Beal Karma Rope 9.8mm x 60m
Features
- For outdoor climbing
- Part of Beal's Active Line range designed to cover the largest range of climbing disciplines possible
- Excellent balance between thinness and control
- 100% recyclable materials
- For every rope purchased Beal plant one tree
Specifications
| Rope Type | Single |
|---|---|
| Diameter | 9.8mm |
| Weight Per Metre | 58g |
| Guaranteed Impact Force | 7.5kN |
| Guaranteed Number of Falls | 5 |
| Sheath Slippage | 0mm |
| Static Elongation | 8% |
| Dynamic Elongation | 0.36 |
| Made From | Polyamide |
| Warning | Rock and Alpine climbing are potentially hazardous and dangerous. Any person using our equipment in any manner is personally responsible for learning the proper techniques involved and that the equipment used is designed for the application. The purchaser accepts full and complete responsibility and liability for any and all damages and injury that may result from use of equipment bought from Bivouac Outdoor. Instruction should be sought from professionals in the safe use of this piece of equipment. This equipment is designed for recreational use and should not be used for industrial applications. |
| Technologies | Active Line range: has been designed to cover the largest range of climbing disciplines possible, from the occasional outing to multipitch with sport and indoor climbing in between. They are all constructed using Beal's advanced technology which provides excellent impact absorption thanks to low impact forces. Benefits: excellent impact absorption thanks to low impact forces; without chemical treatments. UNICORE technology: an astonishing process, bonding rope sheath and core without affecting the rope's suppleness. If the sheath is cut or torn, the core and sheath remain bonded together so the sheath remains in place allowing you to escape through either ascent or descent whilst taking the necessary precautions. With a standard rope, if the sheath is cut by abrasion over an edge, a frequent occurrence in the mountains, it slides and gathers over some metres and it then becomes impossible to pass this zone, whether ascending or descending. UNICORE technology prevents all sheath slippage and is therefore particularly useful in wet snow and ice conditions such as you may encounter in alpine and ice climbing where the risk of sheath slippage is largely increased. The UNICORE process is compatible with the waterproofing and anti-abrasion treatments on ropes and also provides a durable resistance to moisture. |
