Exped SynMat UL Lite Sleeping Mat

In stock

The SynMat UL Lite provides comfort and warmth in a very lightweight and small package. It features a top and bottom laminated highly compressible microfibre filling, a new anti-slip GripSkin coating, welded through baffle construction and a dual FlatValve to adjust the mat to your sleeping preference easily. Comes with a Mini Pump UL for easy inflation and a pack sack for easy transportation.


  • New anti-slip GripSkin coating
  • Warmth and comfort through top and bottom laminated microfibre filling
  • Welded through baffle construction
  • Dual function FlatValve allows inflation with a one way flap and deflation by inserting attached deflation pin
  • Seams are high frequency welded, the strongest non-sewn method for bonding fabrics
  • The included packsack is dimensioned for easy packing. It can also be used a pillowcase when filled with spare clothing.
  • Comes with a Mini Pump UL to prevent moisture caused through lung inflation from entering the mat, which, in the worst scenario, could lead to mildew build up and damage to the airtight laminate
  • Super lightweight and compact
    • Typical inflation time of 1 minute
    • Fabric eyelets for securing
  • 2 year warranty


Length 183cm
Width 52cm
Thickness 5cm
Rolled Size 20 x 10cm
Fill 60g/m2 Texpedloft Microfibre
Average Weight 390g
Relative Warmth (R Value) 2.5 (0.44m2.kelvins/watt)
Temperature Rating 1°C
Made From Top: 20D polyester, brushed, TPU polyether film laminate, hydrolysis resistant, GripSkin non-slip coating, honeycomb embossed
Bottom: 20D polyester, TPU polyether film laminate, hydrolysis resistant, PU flatvalves
Technologies Used

100% airtight – every single mat is individually tested. Each mat is tested during 72 hours for airtight integrity prior to shipment and various tests are conducted during production to warrant consistency of quality in the manufacturing process. Each mat model endures durability tests through Exped proprietary testing machines in which a 80kg steel cylinder rolls over the mat 15,000 times from edge to edge, and the stamp test in which a 60kg weight is dropped 200 times on to the mat. All mats are designed to withstand 5 x the pressure that can be attained during normal inflation but you should still treat your mat with caution by checking the ground for thorns, preventing animals from biting it, not placing hot pans on it, keeping it away from fire and other heat sources, keeping the mat dry to prevent mildew and avoiding general rough treatment. Lightweight fabrics have an effect on the overall durability of products, but caution can alleviate this.

Exped manufacture under sound environmental and social standards in a high quality conscious family run factory in Taiwan. Research and development takes place in Switzerland.

  • Dirt is the number one enemy of any textile product as minute dust grains abrade the fabrics. Therefore, Exped recommend you wash the mat from time to time with mild soap and lukewarm water. Never machine wash, dry clean or tumble dry.
  • Keep the mat away from heat sources such as fire or a car or tent during the day. The air within the mat can expand and put extreme pressure on baffles, seams and laminates which can then lead to ruptured seam or malfunction.
  • Keep the mat away from sharp objects like thorns, corals, rocks or branches and dogs.
  • Do not use mechanical pumps as they can generate excess pressure which can lead to seam delamination.
  • Keep valves clean as dirt or sand can have negative effects on the airtight seal. Use a little water to wipe the valve clean.
  • If you move the mat from warm to cold places, or inflate the mat while temperature is warm and then they drop, you will experience a loss of pressure in the mat which may lead you to believe the mat is punctured. This is not the case, it is just contraction of the warm air and physics.
  • Changes of pressure: quick changes from sealevel to mountain heights can lead to partial vacuum and make it hard to open the valve. Open them prior to travel.
  • Mat as chair: we recommend using the Exped ChairKit which allows you to convert your mat to a chair our lounger as well as offering additional protection against abrasion, dirt and punctures.
  • Store your mat unrolled and with open valves in a dry, cool and dark place such as under your bed or the attic.
  • Keep away from pets!


Write Your Own Review
You're reviewing:Exped SynMat UL Lite Sleeping Mat
© 2019 Bivouac Outdoor All Rights Reserved