Compare Products
You are currently editing a different comparison in your active browser session, therefore editing has been disabled. If you opt to edit this comparison your existing comparison will be lost
|
Average weight
580g
|
|
|
Capacity
20 Litres
|
|
|
Dimensions
50 x 28 x 22cm
|
|
|
Material
Main: 100% recycled 210D high tenacity ocean-sourced with ripstop nylon, DWR made without PFAS
Lining: 100% recycled 210D nylon, DWR made without PFAS Bottom: 100% recycled 420D nylon, DWR made without PFAS All are bluesign® approved |
|
Average weight
580g
|
|
|
Capacity
20 Litres
|
|
|
Dimensions
50 x 28 x 22cm
|
|
|
Material
Main: 100% recycled 210D high tenacity ocean-sourced with ripstop nylon, DWR made without PFAS
Lining: 100% recycled 210D nylon, DWR made without PFAS Bottom: 100% recycled 420D nylon, DWR made without PFAS All are bluesign® approved |
|
Average weight
580g
|
|
|
Capacity
20 Litres
|
|
|
Dimensions
50 x 28 x 22cm
|
|
|
Material
Main: 100% recycled 210D high tenacity ocean-sourced with ripstop nylon, DWR made without PFAS
Lining: 100% recycled 210D nylon, DWR made without PFAS Bottom: 100% recycled 420D nylon, DWR made without PFAS All are bluesign® approved |
- Unisex fit tailored to optimise comfort and stability
- Torso length: 38-51cm
- Load range: 2-9kg
- Atilon foam framesheet adds stiffness to backpanel for load support without compromising mobility
- AirScapeâ„¢ backpanel: mesh-covered ridged foam with centre air channel allows maximum ventilation while keeping the load close to the body
- Mesh-covered, padded harness with die-cut airflow channels provides comfortable load support
- Adjustable sternum strap with safety whistle
- Webbing hipbelt with padded hipwings adds stability and helps support load
- Wide, dual-zip panel access to main compartment
- Internal sleeve with hose routing port and Hydraclip for easily hanging hydration reservoir (reservoir not included)
- Upper side compression straps stabilise load and capture trekking pole handles
- Front shove-it pocket for stashing a layer or other quick-access items
- Zipped pocket with key clip on upper front panel provides secure storage for smaller items
- Stretch mesh side pockets carry water bottles or other quick-access items
- Lower front loops for trekking pole tip capture
- Blinker light attachment loop (light not included)
- This product meets bluesign® PRODUCT requirement, which means materials and components have been selected that adhere to rigorous environmental and social criteria during production
- Unisex fit tailored to optimise comfort and stability
- Torso length: 38-51cm
- Load range: 2-9kg
- Atilon foam framesheet adds stiffness to backpanel for load support without compromising mobility
- AirScapeâ„¢ backpanel: mesh-covered ridged foam with centre air channel allows maximum ventilation while keeping the load close to the body
- Mesh-covered, padded harness with die-cut airflow channels provides comfortable load support
- Adjustable sternum strap with safety whistle
- Webbing hipbelt with padded hipwings adds stability and helps support load
- Wide, dual-zip panel access to main compartment
- Internal sleeve with hose routing port and Hydraclip for easily hanging hydration reservoir (reservoir not included)
- Upper side compression straps stabilise load and capture trekking pole handles
- Front shove-it pocket for stashing a layer or other quick-access items
- Zipped pocket with key clip on upper front panel provides secure storage for smaller items
- Stretch mesh side pockets carry water bottles or other quick-access items
- Lower front loops for trekking pole tip capture
- Blinker light attachment loop (light not included)
- This product meets bluesign® PRODUCT requirement, which means materials and components have been selected that adhere to rigorous environmental and social criteria during production
- Unisex fit tailored to optimise comfort and stability
- Torso length: 38-50cm
- Load range: 2-9kg
- Atilon foam framesheet adds stiffness to backpanel for load support without compromising mobility
- AirScapeâ„¢ backpanel: mesh-covered ridged foam with centre air channel allows maximum ventilation while keeping the load close to the body
- Mesh-covered, padded harness with die-cut airflow channels provides comfortable load support
- Adjustable sternum strap with safety whistle
- Webbing hipbelt with padded hipwings adds stability and helps support load
- Wide, dual-zip panel access to main compartment
- Internal sleeve with hose routing port and Hydraclip for easily hanging hydration reservoir (reservoir not included)
- Upper side compression straps stabilise load and capture trekking pole handles
- Front shove-it pocket for stashing a layer or other quick-access items
- Zipped pocket with key clip on upper front panel provides secure storage for smaller items
- Stretch mesh side pockets carry water bottles or other quick-access items
- Lower front loops for trekking pole tip capture
- Blinker light attachment loop (light not included)
- This product meets bluesign® PRODUCT requirement, which means materials and components have been selected that adhere to rigorous environmental and social criteria during production
|
Average weight
1.03kg
|
|
|
Capacity
22 Litres
|
|
|
Dimensions
51 x 29 x 29cm
|
|
|
Material
Main and lining: 100% recycled 100D high tenacity nylon with dobby check ripstop, DWR made without PFAS
Lining: 100% recycled 70D nylon, DWR made without PFAS Bottom: 100% recycled 420D nylon, DWR made without PFAS All fabrics are bluesign® approved |
|
|
Harness
BioStretch
|
|
Average weight
1.03kg
|
|
|
Capacity
22 Litres
|
|
|
Dimensions
51 x 29 x 29cm
|
|
|
Material
Main and lining: 100% recycled 100D high tenacity nylon with dobby check ripstop, DWR made without PFAS
Lining: 100% recycled 70D nylon, DWR made without PFAS Bottom: 100% recycled 420D nylon, DWR made without PFAS All fabrics are bluesign® approved |
|
|
Harness
BioStretch
|
|
Average weight
1.03kg
|
|
|
Capacity
22 Litres
|
|
|
Dimensions
51 x 29 x 29cm
|
|
|
Material
Main and lining: 100% recycled 100D high tenacity nylon with dobby check ripstop, DWR made without PFAS
Lining: 100% recycled 70D nylon, DWR made without PFAS Bottom: 100% recycled 420D nylon, DWR made without PFAS All fabrics are bluesign® approved |
|
|
Harness
BioStretch
|
Fit Tip: Womens fit
Fit Tip: Womens fit
Fit Tip: Womens fit
- Load range 4.5-13.6kg
- AirScapeâ„¢ backpanel is an injection-molded 100% recycled polypro AirScape framesheet with 50% recycled die-cut EVA foam that provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use; mesh-covered foam lumbar for lightweight and comfortable contact surfaces
- BioStretch harness and hipbelt: integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement, the spacermesh over die-cut foam provides a breathable, comfortable contact surface and the harness system easily adjusts to fit various torso lengths with the micro-adjustable sliding yoke allowing easier and more accurate fine-tuning
- Adjustable sternum strap with safety whistle buckle
- Seamless lumbar-to-hipbelt body wrap with crossbody ErgoPull system to pull the lumbar into your body
- Zipped hipbelt pockets
- Dual-zipped panel access to main compartment
- Internal zipped mesh pocket with key clip
- Large stretch mesh Shove-it front panel pocket
- Tuck-away ice axe attachments with bungee tie-off
- Stow-on-the-Goâ„¢ trekking pole attachment
- Top panel zipped slash pocket
- LidLockâ„¢ bike helmet attachment
- Lower side compression straps
- Side stretch mesh pockets
- Internal hydration reservoir sleeve
- Easy-access, expandable stretch mesh harness pocket
- Dual-zipped fabric hipbelt pockets
- Blinker light attachment
- Fabrics are bluesign® approved
- Load range 4.5-13.6kg
- AirScapeâ„¢ backpanel is an injection-molded 100% recycled polypro AirScape framesheet with 50% recycled die-cut EVA foam that provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use; mesh-covered foam lumbar for lightweight and comfortable contact surfaces
- BioStretch harness and hipbelt: integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement, the spacermesh over die-cut foam provides a breathable, comfortable contact surface and the harness system easily adjusts to fit various torso lengths with the micro-adjustable sliding yoke allowing easier and more accurate fine-tuning
- Adjustable sternum strap with safety whistle buckle
- Seamless lumbar-to-hipbelt body wrap with crossbody ErgoPull system to pull the lumbar into your body
- Zipped hipbelt pockets
- Dual-zipped panel access to main compartment
- Internal zipped mesh pocket with key clip
- Large stretch mesh Shove-it front panel pocket
- Tuck-away ice axe attachments with bungee tie-off
- Stow-on-the-Goâ„¢ trekking pole attachment
- Top panel zipped slash pocket
- LidLockâ„¢ bike helmet attachment
- Lower side compression straps
- Side stretch mesh pockets
- Internal hydration reservoir sleeve
- Easy-access, expandable stretch mesh harness pocket
- Dual-zipped fabric hipbelt pockets
- Blinker light attachment
- Fabrics are bluesign® approved
- Torso length: 38-48cm
- Load range 4.5-13.6kg
- AirScapeâ„¢ backpanel is an injection-molded 100% recycled polypro AirScape framesheet with 50% recycled die-cut EVA foam that provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use; mesh-covered foam lumbar for lightweight and comfortable contact surfaces
- BioStretch harness and hipbelt: integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement, the spacermesh over die-cut foam provides a breathable, comfortable contact surface and the harness system easily adjusts to fit various torso lengths with the micro-adjustable sliding yoke allowing easier and more accurate fine-tuning
- Adjustable sternum strap with safety whistle buckle
- Seamless lumbar-to-hipbelt body wrap with crossbody ErgoPull system to pull the lumbar into your body
- Zipped hipbelt pockets
- Dual-zipped panel access to main compartment
- Internal zipped mesh pocket with key clip
- Large stretch mesh Shove-it front panel pocket
- Tuck-away ice axe attachments with bungee tie-off
- Stow-on-the-Goâ„¢ trekking pole attachment
- Top panel zipped slash pocket
- LidLockâ„¢ bike helmet attachment
- Lower side compression straps
- Side stretch mesh pockets
- Internal hydration reservoir sleeve
- Easy-access, expandable stretch mesh harness pocket
- Dual-zipped fabric hipbelt pockets
- Blinker light attachment
- Fabrics are bluesign® approved
|
Average weight
730g
|
|
|
Capacity
26 Litres
|
|
|
Dimensions
51 x 31 x 25.5cm
|
|
|
Material
Main: 100D 100% recycled high-tenacity bird eye nylon, PFAS-free DWR
Accent: 420D 100% recycled nylon, PFAS-free DWR |
|
|
Harness
BioStretchâ„¢
|
|
Average weight
730g
|
|
|
Capacity
26 Litres
|
|
|
Dimensions
51 x 31 x 25.5cm
|
|
|
Material
Main: 100D 100% recycled high-tenacity bird eye nylon, PFAS-free DWR
Accent: 420D 100% recycled nylon, PFAS-free DWR |
|
|
Harness
BioStretchâ„¢
|
Fit Tip: Bottom frame fits quite narrow
Fit Tip: Bottom frame fits quite narrow
- Traditional panel loader design with convenient zip access to main compartment
- AirSpeedâ„¢ suspension: LightWire alloy frame creates low profile air space optimising pack balance and ventilation
- AirSpeedâ„¢ backpanel: 3D-tensioned breathable mesh backpanel ensures supportive fit and excellent ventilation
- Fixed BioStretch harness:
- Elastic binding to deliver maximum flexibility without sacrificing stability for dynamic body movement
- Spacer mesh over die-cut foam provides breathable, comfortable contact surface
- Adjustable sternum strap with rescue whistle
- Removable 25mm web belt provides extra stability
- Dual upper side compression straps with trekking pole capture and lower compression straps for additional load control
- Front fabric shove-it pocket
- Extra-tall stretch mesh side pockets keep contents secure
- External access zip pocket with key clip keeps small, essential items handy
- Internal reservoir sleeve with hose port in backpanel and Osprey Hydraclip for easily hanging a reservoir
- Dual trekking pole loops
- Included raincover stored in zipped pocket at base of pack
- bluesign®-approved fabrics with PFAS-free DWR (durable water repellent) treatment
- Traditional panel loader design with convenient zip access to main compartment
- AirSpeedâ„¢ suspension: LightWire alloy frame creates low profile air space optimising pack balance and ventilation
- AirSpeedâ„¢ backpanel: 3D-tensioned breathable mesh backpanel ensures supportive fit and excellent ventilation
- Fixed BioStretch harness:
- Elastic binding to deliver maximum flexibility without sacrificing stability for dynamic body movement
- Spacer mesh over die-cut foam provides breathable, comfortable contact surface
- Adjustable sternum strap with rescue whistle
- Removable 25mm web belt provides extra stability
- Dual upper side compression straps with trekking pole capture and lower compression straps for additional load control
- Front fabric shove-it pocket
- Extra-tall stretch mesh side pockets keep contents secure
- External access zip pocket with key clip keeps small, essential items handy
- Internal reservoir sleeve with hose port in backpanel and Osprey Hydraclip for easily hanging a reservoir
- Dual trekking pole loops
- Included raincover stored in zipped pocket at base of pack
- bluesign®-approved fabrics with PFAS-free DWR (durable water repellent) treatment