Compare Products
You are currently editing a different comparison in your active browser session, therefore editing has been disabled. If you opt to edit this comparison your existing comparison will be lost
Elixir 2 2-Person Tent with Footprint
|
Canopy material
Solution-dyed 20D nylon micromesh / 40D ripstop polyester and PFAS-free DWR
|
|
|
Capacity
2 Person
|
|
|
Clip/Sleeve
Clip
|
|
|
Doors
2
|
|
|
Floor area
2.82m2 (213 x 132cm)
|
|
|
Floor material
75D taffeta polyester 3000mm polyether urethane and PFAS-free DWR
|
|
|
Fly material
75D ripstop polyester 1500mm polyether urethane and PFAS-free DWR
|
|
|
Height
104cm
|
|
|
Package weight
2.82kg
|
|
|
Packed size
51 x 17cm
|
|
|
Poles
7000 Series Aluminum
|
|
|
Weight
2.33kg
|
|
|
Vestibule area
1.41m2
|
- Freestanding design, colour-coded poles and webbing and included footprint make for fast and intuitive setup
- A mix of mesh and solid fabric panels offers a balance of ventilation, warmth and privacy
- Updated PFAS-free DWR (durable water resistant) coating and taped seams improve durability and waterproofness and keep the elements out where they belong
- Strong 7000-series aluminium poles stand up to variable weather conditions Large side-entry vestibules store gear
- True rectangular floor and spacious interior fits modern wide sleeping mats with ease
- Unique pole geometry provides exceptional head room (104cm)
- Large StayDry™ doors in the fly with built-in rain gutter
- Updated kickstand vents for extra ventilation and to help deal with any condensation
- Straight-zip doors increase durability, are easy to use one handed and zip close to a single point so you always know where to open, even in the dark
- Large gear lofts for overhead storage and cable ports on all pockets for easy cord management
- Mesh fabric is solution-dyed, meaning it uses pre-dyed fibres to minimise the water and energy required to colour the fabric. Using solution-dyed fabrics reduces carbon emissions by at least 80% compared to MSR's previous fabrics
- Includes footprint, 10 x hook stakes, guy lines, stuff sack and setup instructions
Moondance 2 FN Tent
Expert Pick
|
Canopy material
20D ripstop nylon
|
|
|
Capacity
2 Person
|
|
|
Clip/Sleeve
Clip
|
|
|
Doors
2
|
|
|
Floor area
2.86m2 (220 x 130cm)
|
|
|
Floor material
25,000+mm WaterBloc™ PU laminated 40D nylon
|
|
|
Fly material
20D ripstop nylon, silicon SWR outside, PU coating inside, 2000mm waterhead
|
|
|
Height
110cm
|
|
|
Package weight
2.09kg
|
|
|
Packed size
Tent sack compressed: 33 x 15cm
Pole collapsed length: 49cm |
|
|
Poles
9.6mm DAC Featherlite NSL
|
|
|
Weight
1.92kg
|
- 2 person, 3 to 4 season, freestanding
- 100% waterproof tub floor with factory-tape-sealed-seams
- 100% waterproof fly with factory-tape-sealed-seams
- Mont seam sealing is lightweight, durable and totally waterproof, ready out of the box and there is no need to seam seal your new Mont tent
- Symmetrical design allows poles and fly to attach to inner at either end
- 2-piece pole system is easy to use
- Non-directional pole hubs can face either direction for an easier pitch
- Dual entrance and dual vestibules
- 4 internal pockets, two extra-large full width, two large half width
- Carabiner clip on ceiling
- Roof vent for ventilation can be accessed internally
- Moondance 2/2FN Footprint also available for greater water and abrasion protection (sold separately)
- Multipitch versatility: pitch an ultra-ultralight shelter using the Fly and Footprint only (Footprint sold separately)
- 3-point attachment guy ropes for stability
- Includes 10 x Bolt pegs with cord pulls (9g each)
- Includes Repair kit: fabric patches, emergency pole repair sleeve
