Compare Products
You are currently editing a different comparison in your active browser session, therefore editing has been disabled. If you opt to edit this comparison your existing comparison will be lost
Moondance 2 FN Tent
Expert Pick
|
Canopy material
20D ripstop nylon
|
|
|
Capacity
2 Person
|
|
|
Clip/Sleeve
Clip
|
|
|
Doors
2
|
|
|
Floor area
2.86m2 (220 x 130cm)
|
|
|
Floor material
25,000+mm WaterBloc™ PU laminated 40D nylon
|
|
|
Fly material
20D ripstop nylon, silicon SWR outside, PU coating inside, 2000mm waterhead
|
|
|
Height
110cm
|
|
|
Package weight
2.09kg
|
|
|
Packed size
Tent sack compressed: 33 x 15cm
Pole collapsed length: 49cm |
|
|
Poles
9.6mm DAC Featherlite NSL
|
|
|
Weight
1.92kg
|
- 2 person, 3 to 4 season, freestanding
- 100% waterproof tub floor with factory-tape-sealed-seams
- 100% waterproof fly with factory-tape-sealed-seams
- Mont seam sealing is lightweight, durable and totally waterproof, ready out of the box and there is no need to seam seal your new Mont tent
- Symmetrical design allows poles and fly to attach to inner at either end
- 2-piece pole system is easy to use
- Non-directional pole hubs can face either direction for an easier pitch
- Dual entrance and dual vestibules
- 4 internal pockets, two extra-large full width, two large half width
- Carabiner clip on ceiling
- Roof vent for ventilation can be accessed internally
- Moondance 2/2FN Footprint also available for greater water and abrasion protection (sold separately)
- Multipitch versatility: pitch an ultra-ultralight shelter using the Fly and Footprint only (Footprint sold separately)
- 3-point attachment guy ropes for stability
- Includes 10 x Bolt pegs with cord pulls (9g each)
- Includes Repair kit: fabric patches, emergency pole repair sleeve
Elixir 2 2-Person Tent with Footprint
|
Canopy material
Solution-dyed 20D nylon micromesh / 40D ripstop polyester and PFAS-free DWR
|
|
|
Capacity
2 Person
|
|
|
Clip/Sleeve
Clip
|
|
|
Doors
2
|
|
|
Floor area
2.82m2 (213 x 132cm)
|
|
|
Floor material
75D taffeta polyester 3000mm polyether urethane and PFAS-free DWR
|
|
|
Fly material
75D ripstop polyester 1500mm polyether urethane and PFAS-free DWR
|
|
|
Height
104cm
|
|
|
Package weight
2.82kg
|
|
|
Packed size
51 x 17cm
|
|
|
Poles
7000 Series Aluminum
|
|
|
Weight
2.33kg
|
|
|
Vestibule area
1.41m2
|
- Freestanding design, colour-coded poles and webbing and included footprint make for fast and intuitive setup
- A mix of mesh and solid fabric panels offers a balance of ventilation, warmth and privacy
- Updated PFAS-free DWR (durable water resistant) coating and taped seams improve durability and waterproofness and keep the elements out where they belong
- Strong 7000-series aluminium poles stand up to variable weather conditions Large side-entry vestibules store gear
- True rectangular floor and spacious interior fits modern wide sleeping mats with ease
- Unique pole geometry provides exceptional head room (104cm)
- Large StayDry™ doors in the fly with built-in rain gutter
- Updated kickstand vents for extra ventilation and to help deal with any condensation
- Straight-zip doors increase durability, are easy to use one handed and zip close to a single point so you always know where to open, even in the dark
- Large gear lofts for overhead storage and cable ports on all pockets for easy cord management
- Mesh fabric is solution-dyed, meaning it uses pre-dyed fibres to minimise the water and energy required to colour the fabric. Using solution-dyed fabrics reduces carbon emissions by at least 80% compared to MSR's previous fabrics
- Includes footprint, 10 x hook stakes, guy lines, stuff sack and setup instructions
Hubba Hubba HD 2-Person Backpacking Tent
|
Canopy material
Solution-dyed 20D polyester micromesh / 20D ripstop nylon and PFAS-free DWR
|
|
|
Capacity
2 Person
|
|
|
Clip/Sleeve
Clip
|
|
|
Doors
2
|
|
|
Floor area
2.95m2
|
|
|
Floor material
30D ripstop nylon 6000mm polyether urethane and PFAS-free DWR
|
|
|
Fly material
20D ripstop nylon 3000mm polyether urethane and PFAS-free silicone, FR Free
|
|
|
Height
102cm
|
|
|
Package weight
1.8kg
|
|
|
Packed size
58 x 13cm
|
|
|
Poles
DAC NFL 9.3mm
|
|
|
Weight
1.61kg
|
|
|
Vestibule area
1.53m2
|
- Symmetrical design and locking metal stake loop grommets make tent setup fast and simple
- Fabrics and coatings have been updated to improve hydrolysis resistance, making the HD more waterproof than previous versions and extending the life of the tent
- Strong and light DAC NFL poles stand up to variable weather conditions
- Extra guylines and included Mini-Groundhog stakes help keep the HD grounded no matter the weather and let you configure your preferred setup or adapt to any camp spot Large vestibules protect gear in bad weather
- True rectangular floor and large interior volume offer more living space for less weight and accommodates a wider/rectangular sleeping mat
- Large StayDry™ doors in the fly with built-in rain gutter
- Updated kickstand vents for extra ventilation and to help deal with any condensation
- Straight-zip doors increase durability, are easy to use one handed and zip close to a single point so you always know where to open, even in the dark
- Handy gear lofts, pockets and clothesline
- Floor, mesh and rainfly fabrics are all solution-dyed, meaning they use pre-dyed fibres to minimise the water and energy required to colour the fabric. Using solution-dyed fabrics reduces carbon emissions by at least 80% compared to MSR's previous fabrics
- Side-loading roll-top stuff sack makes putting the tent away faster and easier than a traditional top-loading bag
