Compare Products
You are currently editing a different comparison in your active browser session, therefore editing has been disabled. If you opt to edit this comparison your existing comparison will be lost
|
Average weight
1.44kg (Small-Medium), 1.51kg (Large-XL)
|
|
|
Capacity
40 Litres (Small-Medium), 42 Litres (Large-XL)
|
|
|
Material
Main: bluesign®-approved NanoFly™ 75% 210D nylon (100% recycled) with 25% UHMWPE ripstop, PFAS-free DWR treatment
Accent: bluesign®-approved 100% recycled 70D nylon, PFAS-free DWR treatment Bottom: bluesign®-approved 100% recycled 420D nylon, PFAS-free DWR treatment |
|
|
Dimensions
72 x 30 x 34cm (Small-Medium)
N/A (Large-XL) |
|
|
Harness
BioStretchâ„¢
|
- Fit tip:
- Comfy up to 12-14kg. Over that weight it is missing a bit padding on shoulder and hip straps.
- Fit tip:
- Comfy up to 12-14kg. Over that weight it is missing a bit padding on shoulder and hip straps.
- Load range 7-16kg
- Top-loading design with drawcord closure
- Constructed with Osprey's technical NanoFly® fabric, which is reinforced with a triple-grid UHMWPE ripstop for outstanding strength, and extra-tough stretch pockets, this pack elevates our understanding of durability
- Talon Pro is designed to be lightweight, fast moving and thoroughly featured to effectively adapt to the multi-sport demands of on-the-go adventurers and athletes
- New torso adjustment and premium injection-moulded framesheet provides just-right structure to the pack and allows for a more comprehensive fit across the full spectrum of torso range
- 4.0 mm LightWireâ„¢ peripheral frame effectively transfers load to hip belt
- Injection-moulded AirScapeâ„¢ framesheet with die-cut foam provides a supportive, close-to-body fit while offering flexibility and ventilated airflow channels for active use
- Mesh-covered foam lumbar for lightweight and comfortable contact surfaces
- Sliding yoke torso length system ensures precise, stable fit for all users and is easily adjusted with two webbing straps
- BioStretchâ„¢ harness and hip belt:
- Integrated BioStretchâ„¢ seams offer maximum flexibility without sacrificing stability for dynamic body movement
- Spacermesh over die-cut foam provides breathable, comfortable contact surface
- Adjustable sternum strap with safety whistle buckle
- Crossbody ErgoPull hip belt system to pull lumbar to your body for stability
- Dual-zipped fabric hip belt pockets
- Removable, floating lid can be extended to accommodate overloads
- Internal compression strap effectively controls upper load
- Internal hydration reservoir sleeve with centre pass through port
- Large stretch mesh front panel pocket
- Tuck-away ice axe attachment with bungee tie-off
- Stretch woven side pockets
- Dual upper quick release side compression straps
- Dual V-pull lower side compression straps
- Removable accessory pad straps on lower front panel
- Blinker light attachment
- Constructed with high-quality bluesign®-approved recycled high-tenacity nylon
|
Average weight
1.6kg
|
|
|
Capacity
44 Litres
|
|
|
Material
Main: 100D x 210D 100% recycled nylon with honeycomb ripstop, DWR treatment made without PFAS
Lining: 210D 100% recycled nylon, DWR treatment made without PFAS Bottom: 420D 100% recycled nylon, DWR treatment made without PFAS Mesh: 100% recycled polyester All are bluesign® approved |
|
|
Dimensions
73 x 34 x 34cm
|
|
|
Harness
Padded spacermesh
|
- Fit tip:
- Multiple torso lengths. Sits further from your back.
- Fit tip:
- Multiple torso lengths. Sits further from your back.
- Load range: 7 - 16kg
- AirSpeedâ„¢ suspension: supportive mesh trampoline backpanel provides excellent ventilation and the LightWireâ„¢ peripheral frame tensions the backpanel mesh and creates load support structure
- Padded, full-yoke harness featuring
- Edgeless design, die-cut airflow channels and breathable spacermesh contact surfaces
- Load lifters balance upper pack for optimal weight distribution
- Adjustable sternum strap with magnetic closure, safety whistle and magnetic bite valve attachment
- Mesh-covered padded hipbelt integrates seamlessly into the mesh backpanel for ultimate comfort with Crossbody ErgoPullâ„¢ system to ensure a snug fit for optimal load transfer and two zipped pockets for keeping small necessities to hand
- Top-loading main compartment with cinch closure and top lid
- Hidden side-zip access to main compartment
- Zipped bottom access to separate, collapsible compartment
- Fixed top lid with large compartment and underlid zipped pocket with key clip
- Large, hidden side-zip pocket for additional storage
- Stretch side pockets for water bottles or other quick-access items
- Upper and lower side compression straps to stabilise your load
- Ice tool loop with bungee tie-off
- Stow-on-the-Goâ„¢ trekking pole attachment
- Front panel lash loops for attaching extra gear
- Internal sleeve with hose routing port and Hydraclip for easily hanging hydration reservoir (reservoir not included)
- Removable sleeping pad/accessory straps
- Raincover included in a pocket at the base of the pack
- This product meets bluesign® PRODUCT requirement, which means materials and components have been selected that adhere to rigorous environmental and social criteria during production
|
Average weight
890g
|
|
|
Capacity
45 Litres
|
|
|
Material
Main: Challenge Sailcloth Ultra 200
Abrasion panel: Challenge Sailcloth Ultra 400 Front pocket: dual 4-way stretch mesh Accents: 100D nylon 4mm ripstop |
- Fit tip:
- Comfy for a fastpacking pack
- Fit tip:
- I’ve found the sizing runs quite small. Try it on with some weight in it and see where the shoulder straps and hip belt sit before you choose a size.
- Fit tip:
- Comfy for a fastpacking pack
- Fit tip:
- I’ve found the sizing runs quite small. Try it on with some weight in it and see where the shoulder straps and hip belt sit before you choose a size.
- Challenge Sailcloth Ultra 200 body fabric is lightweight, tear resistant and extremely durable
- Running vest-inspired shoulder straps with extra storage pockets makes for comfortable and dynamic carrying system
- Roll-top closure, taped seams and waterproof fabric create weatherproof pack body
- Removable frame pad gives structure with minimal weight penalty
- Removable hip belt system with stretch pockets can reduce weight or allow for user modification
- External Power Mesh stretch outer pocket and two oversized ripstop side pockets
- Four adjustable and removable Dynex core compression straps secure the pack and allow for alternative adjustment and lashing systems
- Internal sleeve is hydration bladder compatible
- Modular Design allows quick and secure attachment of the Beta Light Satellite 4L Bag for additional storage
- Main pack volume is 43 litres plus dual 1-litre side pockets while stretch front and hip pockets are a bonus volume